Side-Power bow & stern thrusters

SEP Series Thrusters
Thrusters enabled for DC Speed Control

·   Temperature monitoring

·   Increased lifetime of directional solenoids because
    the solenoids is not switching under load

·   IPC intelligence for extra safety

· SEP Series thrusters is delivered with the PPC-800 Speed Controller included

AVAILABLE MODELS (refer to the SE models for measurements/performance data):
SEP80/185T (-IP)
SEP100/185T (-IP)
SEP120/215T (-IP)
SEP130/250T (-IP)
SEP150/215T
SEP170/250TC (-IP)
SEP210/250TC
SEP240TCi
SEP285TCi
SXP80/185T
SXP100/185T
SRP80/185T
SRP100/185T
SRP130/250T
SRP170/250TC
SRP210/250TC

Any Side-Power DC electric thruster can be upgraded to SEP specifications by qualified service personel

To upgrade a standard on/off thruster to a speed controlled thruster, you need a PPC 800 and the internal wiring loom needs to be upgraded with one of the following kits:

8 1997 - Upgrade kit SR80/100
8 1998 - Upgrade kit SE100/120/210/240
8 1999 - Upgrade kit SE30/40/60/80/130/150/170

Contact your local Side-Power distributor to get the correct upgrade kit for older Side-Power thrusters.

NB: Due to their sealed construction, IP-models (including SX) must be upgraded by an authorized Side-Power Distributor!